Supervision, administration, monitoring
Analysis, study, examination
Development, design, planning
COMPANY SERVICES
Consulting
Organization of construction
Legal support
Development of solutions for stable supply of heat and cold in residential, commercial and industrial facilities, optimization of systems to minimize energy consumption.
>
>
Complex design and modernization of boiler plants, ensuring their efficient operation, compliance with regulatory requirements and reliability.
>
>
Design and implementation of systems to ensure a comfortable microclimate, taking into account energy efficiency, modern technologies and environmental standards.
>
>
Design and implementation of systems to ensure efficient water supply and drainage, taking into account energy efficiency, modern technologies and environmental standards.
>
>
The final stage includes testing, setting up equipment, preparing documentation and training personnel for efficient operation of the systems.
We provide high-quality technical support at all stages of project implementation: we provide author supervision, quality control of installation, and also provide consultations for contractors. In addition, we provide full legal support, including preparation of documents, obtaining permits and checking compliance with regulations.
Впровадження систем, що зменшують екологічний вплив виробництв, розробка технологій очищення стічних вод, утилізації відходів і зменшення викидів у довкілля.
>
>
Розробка і впровадження заходів для зменшення енергоспоживання, впровадження "зелених" технологій та підвищення економічності роботи об’єктів.
>
>
Проєктування електропостачання, освітлення, систем заземлення та електробезпеки з використанням сучасного обладнання та технологій.
>
>
Інтеграція систем автоматизації для управління інженерними мережами, підвищення їх ефективності, контролю та зменшення експлуатаційних витрат.
>
>
Supervision, administration, monitoring
Analysis, study, examination
Development, design, planning
COMPANY SERVICES
Consulting
Organization of construction
Legal support
Legal support and commissioning
Technical supervision and support of the project
Development of technical solutions
- Complex preparation of documentation for obtaining permits for installation and operation of systems.
- Organization of procedures for inspection of water supply and drainage systems by control bodies.
- Conducting commissioning works: leak testing, testing of pumping equipment, adjustment of control devices.
- Preparation of executive documentation necessary for the introduction of systems into industrial operation.
- Briefing and training of the client's service personnel on the rules of operation of the systems.
- The author's supervision of construction and installation works in accordance with the project documentation.
- Control of technical compliance of installation of engineering systems (welding, sealing, installation of pumping stations).
- Providing technical advice on adapting solutions during the installation process.
- Conducting intermediate and final technical audit of installed systems.
- Carrying out a technical and economic feasibility study with the determination of the optimal water supply and drainage scheme.
- Engineering modeling of systems taking into account the requirements of the customer and current building regulations (DBN, SNiP).
- Development of design and estimate documentation, including hydraulic calculations, selection of equipment and materials.
- Coordination of the project with the controlling authorities to obtain the necessary permits.
WATER SUPPLY
AND DRAINAGE
AND DRAINAGE
ВОДОПОСТАЧАННЯ
ТА ВОДОВІДВЕДЕННЯ
ТА ВОДОВІДВЕДЕННЯ
Development of technical solutions
- Виконання техніко-економічного обґрунтування з визначенням оптимальної схеми водопостачання та водовідведення.
- Інженерне моделювання систем з урахуванням вимог замовника та чинних будівельних норм (ДБН, СНіП).
- Розробка проєктно-кошторисної документації, включаючи гідравлічні розрахунки, підбір обладнання та матеріалів.
- Узгодження проєкту з контролюючими органами для отримання необхідних дозволів.
Technical supervision and support of the project
- The author's supervision of construction and installation works in accordance with the project documentation.
- Control of technical compliance of installation of engineering systems (welding, sealing, installation of pumping stations).
- Providing technical advice on adapting solutions during the installation process.
- Conducting intermediate and final technical audit of installed systems.
Legal support and commissioning
- Complex preparation of documentation for obtaining permits for installation and operation of systems.
- Organization of procedures for inspection of water supply and drainage systems by control bodies.
- Conducting commissioning works: leak testing, testing of pumping equipment, adjustment of control devices.
- Preparation of executive documentation necessary for the introduction of systems into industrial operation.
- Briefing and training of the client's service personnel on the rules of operation of the systems.
HEATING, VENTILATION,
AIR CONDITIONING
AIR CONDITIONING
- Performing thermotechnical and aerodynamic calculations to determine the optimal parameters of heating, ventilation and air conditioning systems.
- Design of systems taking into account energy efficiency, environmental standards and regulatory requirements (DBN, SNiP, EN).
- Development of design and estimate documentation, including selection of equipment (boilers, chillers, fans, heat pumps, etc.).
- Preparation of drawings for the location of air ducts, pipelines and ventilation chambers.
- Coordination of the project in the control bodies and obtaining the necessary permission documents.
- Author's supervision of construction and installation works to ensure compliance with project decisions.
- Quality control of equipment installation: boilers, heat exchangers, ventilation systems, split systems.
- Verification of compliance of heat-insulating materials, sealing of pipelines and installation of air ducts.
- Providing technical advice on the implementation of complex engineering solutions in the installation process.
- Carrying out intermediate control of compliance of works with norms and standards.
- Complex preparation of documentation for obtaining permits for installation and operation of systems.
- Conducting commissioning works: leak testing, testing of pumping equipment, adjustment of control devices.
- Preparation of executive documentation necessary for the introduction of systems into industrial operation.
- Briefing and training of the client's service personnel on the rules of operation of the systems.
Development of technical solutions
Technical supervision and support of the project
Legal support and commissioning
Development of technical solutions
- Performing thermotechnical and aerodynamic calculations to determine the optimal parameters of heating, ventilation and air conditioning systems.
- Design of systems taking into account energy efficiency, environmental standards and regulatory requirements (DBN, SNiP, EN).
- Development of design and estimate documentation, including selection of equipment (boilers, chillers, fans, heat pumps, etc.).
- Preparation of drawings for the location of air ducts, pipelines and ventilation chambers.
- Coordination of the project in the control bodies and obtaining the necessary permission documents.
Technical supervision and support of the project
- Author's supervision of construction and installation works to ensure compliance with project decisions.
- Quality control of equipment installation: boilers, heat exchangers, ventilation systems, split systems.
- Verification of compliance of heat-insulating materials, sealing of pipelines and installation of air ducts.
- Providing technical advice on the implementation of complex engineering solutions in the installation process.
- Carrying out intermediate control of compliance of works with norms and standards.
Legal support and commissioning
- Complex preparation of documentation for obtaining permits for installation and operation of systems.
- Conducting commissioning works: leak testing, testing of pumping equipment, adjustment of control devices.
- Preparation of executive documentation necessary for the introduction of systems into industrial operation.
- Briefing and training of the client's service personnel on the rules of operation of the systems.
- Performing heat engineering calculations to determine the optimal parameters of heat supply systems.
- Design of systems taking into account energy efficiency, environmental standards and regulatory requirements (DBN, SNiP, EN).
- Development of design and estimate documentation, including selection of equipment (boilers, heat pumps, etc.).
- Preparation of location drawings, pipelines, pumps, heat exchangers.
- Coordination of the project in the control bodies and obtaining the necessary permission documents.
- Author's supervision of construction and installation works to ensure compliance with project decisions.
- Quality control of equipment installation: boilers, heat exchangers.
- Verification of compliance of heat-insulating materials, sealing of pipelines and installation of air ducts.
- Providing technical advice on the implementation of complex engineering solutions in the installation process.
- Carrying out intermediate control of compliance of works with norms and standards.
- Preparation of documentation for obtaining permits for the operation of heating, ventilation and air conditioning systems.
- Support of system verification procedures by regulatory bodies.
- Conducting commissioning works: tightness test, equipment testing, hydraulic balancing.
- Setting up control systems to ensure optimal energy consumption.
- Preparation of executive documentation and technical passports of equipment.
- Instructing personnel on system operation, including maintenance of automated control modules.
Development of technical solutions
Technical supervision and support of the project
Legal support and commissioning
TECHNOLOGICAL SOLUTIONS FOR THERMAL SYSTEMS
ТЕХНОЛОГІЧНІ РІШЕННЯ ДЛЯ ТЕПЛОВИХ СИСТЕМ
Development of technical solutions
- Performing heat engineering calculations to determine the optimal parameters of heat supply systems.
- Design of systems taking into account energy efficiency, environmental standards and regulatory requirements (DBN, SNiP, EN).
- Development of design and estimate documentation, including selection of equipment (boilers, heat pumps, etc.).
- Preparation of location drawings, pipelines, pumps, heat exchangers.
- Coordination of the project in the control bodies and obtaining the necessary permission documents.
Technical supervision and support of the project
- Author's supervision of construction and installation works to ensure compliance with project decisions.
- Quality control of equipment installation: boilers, heat exchangers.
- Verification of compliance of heat-insulating materials, sealing of pipelines and installation of air ducts.
- Providing technical advice on the implementation of complex engineering solutions in the installation process.
- Carrying out intermediate control of compliance of works with norms and standards.
Legal support and commissioning
- Preparation of documentation for obtaining permits for the operation of heating, ventilation and air conditioning systems.
- Support of system verification procedures by regulatory bodies.
- Conducting commissioning works: tightness test, equipment testing, hydraulic balancing.
- Setting up control systems to ensure optimal energy consumption.
- Preparation of executive documentation and technical passports of equipment.
- Instructing personnel on system operation, including maintenance of automated control modules.
Legal support and commissioning
Technical supervision and support of the project
Development of technical solutions
- Preparation of a package of documents for obtaining permits for the operation of heating and cooling systems.
- Support of certification procedures and inspections by regulatory authorities.
- Organization and implementation of commissioning works: start-up of boilers, chillers, adjustment of heat and coolant circulation.
- Balancing systems to ensure even distribution of heat and cold throughout the facility.
- Setting up control systems (automation, thermoregulation) to achieve optimal energy consumption.
- Preparation of technical documentation, executive schemes, instructions for personnel.
- Author's supervision of construction and installation works, in particular, installation of boilers, chillers, heat exchangers and pipelines.
- Quality control of welding work, pipeline insulation, tightness of joints.
- Technical consultations to contractors regarding the implementation of complex units of heat and cold supply systems.
- Conducting hydraulic and thermal testing of systems before commissioning.
- Verification of compliance of works with project documentation and current regulatory standards.
- Calculation of heat loads and heat inputs to determine the optimal configuration of systems.
- Designing of heat supply systems (boilers, heat stations) and cooling systems (chillers, cooling towers) taking into account energy efficiency.
- Selection of equipment (heat exchangers, pumps, boilers, chillers) and development of specifications for purchases.
- Preparation of heating and cooling medium supply schemes, including pipelines, pumping stations and distribution nodes.
- Development of project documentation in accordance with DBN, EN, ASHRAE and energy saving standards.
- Coordination of the project in the control bodies and preparation for obtaining permit documentation.
HEAT AND COLD
SUPPLY
SUPPLY
Development of technical solutions
- Calculation of heat loads and heat inputs to determine the optimal configuration of systems.
- Designing of heat supply systems (boilers, heat stations) and cooling systems (chillers, cooling towers) taking into account energy efficiency.
- Selection of equipment (heat exchangers, pumps, boilers, chillers) and development of specifications for purchases.
- Preparation of heating and cooling medium supply schemes, including pipelines, pumping stations and distribution nodes.
- Development of project documentation in accordance with DBN, EN, ASHRAE and energy saving standards.
- Coordination of the project in the control bodies and preparation for obtaining permit documentation.
Technical supervision and support of the project
- Author's supervision of construction and installation works, in particular, installation of boilers, chillers, heat exchangers and pipelines.
- Quality control of welding work, pipeline insulation, tightness of joints.
- Technical consultations to contractors regarding the implementation of complex units of heat and cold supply systems.
- Conducting hydraulic and thermal testing of systems before commissioning.
- Verification of compliance of works with project documentation and current regulatory standards.
Legal support and commissioning
- Preparation of a package of documents for obtaining permits for the operation of heating and cooling systems.
- Support of certification procedures and inspections by regulatory authorities.
- Organization and implementation of commissioning works: start-up of boilers, chillers, adjustment of heat and coolant circulation.
- Balancing systems to ensure even distribution of heat and cold throughout the facility.
- Setting up control systems (automation, thermoregulation) to achieve optimal energy consumption.
- Preparation of technical documentation, executive schemes, instructions for personnel.
Legal support and commissioning
Technical supervision and support of the project
Development of technical solutions
- Preparation of a package of documents for obtaining permits for the operation of automation systems.
- Support of inspections by regulatory authorities and equipment certification.
- Conducting commissioning work: starting automation systems, checking integration with other networksвлі.
- Setting the optimal parameters of automation systems to ensure energy efficiency and reliability of work.
- Preparation of technical documentation: executive diagrams, operating instructions, test reports.
- Staff training in the use of automation, monitoring and emergency response systems.
- Author's supervision of installation work on automation: installation of controllers, laying of cables, connection of sensors and executive devices.
- Quality control of logic controller (PLC) programming and SCADA system settings.
- Technical advice to contractors on the integration of automation with other engineering networks.
- Checking the proper operation of individual components and their compliance with project documentation.
- Testing of management algorithms, backup scenarios and emergency modes.
- Analysis of the technical task and development of the concept of automation of engineering networks (HVAC, water supply, drainage, heat and cold supply, electricity supply).
- Development of the architecture of the automation system, including the selection of controllers, sensors, actuators, cabling systems and software.
- Design of SCADA systems for monitoring and management of engineering networks.
- Preparation of project documentation: functional diagrams, connection diagrams, logical control algorithms and equipment specification.
- Integration of automation with a general building management system (BMS).
AUTOMATION OF
ENGINEERING NETWORKS
ENGINEERING NETWORKS
Development of technical solutions
- Analysis of the technical task and development of the concept of automation of engineering networks (HVAC, water supply, drainage, heat and cold supply, electricity supply).
- Development of the architecture of the automation system, including the selection of controllers, sensors, actuators, cabling systems and software.
- Design of SCADA systems for monitoring and management of engineering networks.
- Preparation of project documentation: functional diagrams, connection diagrams, logical control algorithms and equipment specification.
- Integration of automation with a general building management system (BMS).
Technical supervision and support of the project
- Author's supervision of installation work on automation: installation of controllers, laying of cables, connection of sensors and executive devices.
- Quality control of logic controller (PLC) programming and SCADA system settings.
- Technical advice to contractors on the integration of automation with other engineering networks.
- Checking the proper operation of individual components and their compliance with project documentation.
- Testing of management algorithms, backup scenarios and emergency modes.
Legal support and commissioning
- Preparation of a package of documents for obtaining permits for the operation of automation systems.
- Support of inspections by regulatory authorities and equipment certification.
- Conducting commissioning work: starting automation systems, checking integration with other networksвлі.
- Setting the optimal parameters of automation systems to ensure energy efficiency and reliability of work.
- Preparation of technical documentation: executive diagrams, operating instructions, test reports.
- Staff training in the use of automation, monitoring and emergency response systems.
- Analysis of the technical task for the design of the facility's electrical systems, including distribution networks, lighting, backup power and grounding.
- Development of a conceptual solution for power supply systems, automation of electrotechnical systems and backup power sources.
- Designing power electrical networks: switchboards, cable routes, electrical equipment connection points.
- Design of lighting systems (including emergency) with calculation of the level of illumination in accordance with regulations.
- Development of grounding, lightning protection and surge protection schemes.
- Author's supervision of installation works: laying of cables, installation of switchboards, installation of lighting devices and grounding systems.
- Technical quality control of work performance in accordance with project documentation and electrical safety standards.
- Checking the correctness of the equipment connection and compliance of the electrical connections with the schemes.
- Consultations of contractors on the implementation of complex electrical engineering solutions and integration with other engineering networks.
- Testing of individual system components: insulation testing, grounding testing, voltage testing of distribution devices.
- Support for the integration of backup power systems and automation of electrical solutions.
- Preparation of technical documentation for obtaining permits for the commissioning of power supply systems.
- Support of inspections by state bodies of control and certification of installed equipment.
- Conducting commissioning works: testing the power supply system in different operating modes, checking the operation of protective devices and backup power.
- Setting up electrical systems to ensure energy efficiency and uninterrupted operation.
- Delivery to the client of a complete set of executive documentation: connection diagrams, test logs, technical manuals.
Development of technical solutions
Technical supervision and support of the project
Legal support and commissioning
ELECTRICAL
SOLUTIONS
SOLUTIONS
Development of technical solutions
- Analysis of the technical task for the design of the facility's electrical systems, including distribution networks, lighting, backup power and grounding.
- Development of a conceptual solution for power supply systems, automation of electrotechnical systems and backup power sources.
- Designing power electrical networks: switchboards, cable routes, electrical equipment connection points.
- Design of lighting systems (including emergency) with calculation of the level of illumination in accordance with regulations.
- Development of grounding, lightning protection and surge protection schemes.
Technical supervision and support of the project
- Author's supervision of installation works: laying of cables, installation of switchboards, installation of lighting devices and grounding systems.
- Technical quality control of work performance in accordance with project documentation and electrical safety standards.
- Checking the correctness of the equipment connection and compliance of the electrical connections with the schemes.
- Consultations of contractors on the implementation of complex electrical engineering solutions and integration with other engineering networks.
- Testing of individual system components: insulation testing, grounding testing, voltage testing of distribution devices.
- Support for the integration of backup power systems and automation of electrical solutions.
Legal support and commissioning
- Preparation of technical documentation for obtaining permits for the commissioning of power supply systems.
- Support of inspections by state bodies of control and certification of installed equipment.
- Conducting commissioning works: testing the power supply system in different operating modes, checking the operation of protective devices and backup power.
- Setting up electrical systems to ensure energy efficiency and uninterrupted operation.
- Delivery to the client of a complete set of executive documentation: connection diagrams, test logs, technical manuals.
Evaluation of results and commissioning
Technical support for the implementation of solutions
Analysis of energy consumption and development of solutions
- Testing of energy-efficient systems to assess their performance and compliance with design parameters.
- Analysis of the achieved level of energy saving and preparation of a report on the effectiveness of implemented solutions.
- Preparation of documents for putting modernized systems into operation and obtaining certification (if necessary).
- Staff training for proper maintenance of energy-efficient systems and equipment.
- Provision of recommendations for further improvement of the facility's energy efficiency.
- The author's supervision of the implementation of modernization works for the introduction of energy-efficient systems.
- Quality control of installation of energy-efficient equipment, including recovery systems, etc
- Consulting for contractors on the technical integration of equipment into already existing engineering systems.
- Monitoring the implementation of solutions to ensure their compliance with project documentation and established energy efficiency standards.
- Conducting an energy audit of the object: assessment of the current level of energy consumption, determination of sources of energy loss, analysis of the efficiency of existing systems.
- Development of recommendations for optimizing energy consumption and increasing the efficiency of engineering systems.
- Designing energy-efficient solutions for lighting, heating, ventilation, air conditioning and power supply systems.
- Calculation of the economic feasibility of implementing energy-efficient technologies, including ROI and potential reductions in energy costs.
- Preparation of specifications for system modernization and integration of new energy-efficient technologies.
ENERGY
EFFICIENCY
EFFICIENCY
ЕНЕРГО-
ЕФЕКТИВНІСТЬ
ЕФЕКТИВНІСТЬ
Analysis of energy consumption and development of solutions
- Conducting an energy audit of the object: assessment of the current level of energy consumption, determination of sources of energy loss, analysis of the efficiency of existing systems.
- Development of recommendations for optimizing energy consumption and increasing the efficiency of engineering systems.
- Designing energy-efficient solutions for lighting, heating, ventilation, air conditioning and power supply systems.
- Calculation of the economic feasibility of implementing energy-efficient technologies, including ROI and potential reductions in energy costs.
- Preparation of specifications for system modernization and integration of new energy-efficient technologies.
Technical support for the implementation of solutions
- The author's supervision of the implementation of modernization works for the introduction of energy-efficient systems.
- Quality control of installation of energy-efficient equipment, including recovery systems, etc
- Consulting for contractors on the technical integration of equipment into already existing engineering systems.
- Monitoring the implementation of solutions to ensure their compliance with project documentation and established energy efficiency standards.
Evaluation of results and commissioning
- Testing of energy-efficient systems to assess their performance and compliance with design parameters.
- Analysis of the achieved level of energy saving and preparation of a report on the effectiveness of implemented solutions.
- Preparation of documents for putting modernized systems into operation and obtaining certification (if necessary).
- Staff training for proper maintenance of energy-efficient systems and equipment.
- Provision of recommendations for further improvement of the facility's energy efficiency.
ECOLOGICAL
SOLUTIONS
SOLUTIONS
- Conducting an environmental audit: assessment of the impact of the object's activities on the environment, identification of sources of air, water and soil pollution.
- Development of comprehensive recommendations for minimizing environmental impact and improving environmental indicators.
- Designing engineering solutions for emission reduction, waste disposal and wastewater treatment.
- Development of systems for monitoring environmental indicators based on modern equipment and automated solutions.
- Preparation of specifications for the implementation of environmental technologies in accordance with international and national standards.
- Author's supervision of construction and installation works to ensure compliance with project decisions.
- Quality control of equipment installation: boilers, heat exchangers.
- Verification of compliance of heat-insulating materials, sealing of pipelines and installation of air ducts.
- Providing technical advice on the implementation of complex engineering solutions in the installation process.
- Carrying out intermediate control of compliance of works with norms and standards.
- Preparation of documentation for obtaining permits for the operation of heating, ventilation and air conditioning systems.
- Support of system verification procedures by regulatory bodies.
- Conducting commissioning works: tightness test, equipment testing, hydraulic balancing.
- Setting up control systems to ensure optimal energy consumption.
- Preparation of executive documentation and technical passports of equipment.
- Instructing personnel on system operation, including maintenance of automated control modules.
Analysis of the environmental condition and development of solutions
Technical support for the implementation of measures
Legal support and supervision
Analysis of the environmental condition and development of solutions
- Conducting an environmental audit: assessment of the impact of the object's activities on the environment, identification of sources of air, water and soil pollution.
- Development of comprehensive recommendations for minimizing environmental impact and improving environmental indicators.
- Designing engineering solutions for emission reduction, waste disposal and wastewater treatment.
- Development of systems for monitoring environmental indicators based on modern equipment and automated solutions.
- Preparation of specifications for the implementation of environmental technologies in accordance with international and national standards.
Technical support for the implementation of measures
- Author's supervision of construction and installation works to ensure compliance with project decisions.
- Quality control of equipment installation: boilers, heat exchangers.
- Verification of compliance of heat-insulating materials, sealing of pipelines and installation of air ducts.
- Providing technical advice on the implementation of complex engineering solutions in the installation process.
- Carrying out intermediate control of compliance of works with norms and standards.
Legal support and supervision
- Preparation of documentation for obtaining permits for the operation of heating, ventilation and air conditioning systems.
- Support of system verification procedures by regulatory bodies.
- Conducting commissioning works: tightness test, equipment testing, hydraulic balancing.
- Setting up control systems to ensure optimal energy consumption.
- Preparation of executive documentation and technical passports of equipment.
- Instructing personnel on system operation, including maintenance of automated control modules.
what truly matters is inside.
book
a consultation
a consultation
